38
Hex Head Valve Stem
Hot oil may cause burns. Allow
engine to cool before draining oil.
CAUTION
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1. The Dapco oil drain valve is located on the right
side of the engine crankcase on the 5004 &
5005 and on the left side of the engine crank-
case on the 5023.
2. Place a suitable container under the drain valve.
The fitting of a short piece of hose will help direct
the oil.
3. To drain, turn hex head valve stem counter--
clockwise with 10mm wrench or socket. Open
to full open (approximately 7 turns).
4. After engine is drained, tighten hex stem.
NOTE: Refer to engine manufacturers recommendations
for frequency of oil changes.