DLO DLZ62000 manual Tech Specs, My radio will only scan to occupied FM stations

My TuneStik Control keeps reverting to the main playback controls, and I can’t find my desired frequency.

Remember, when in Frequency Mode, your TuneStik Control will revert back to its Primary Mode after 10 seconds of inactivity. At that time, the station you were tuned to will become a new preset on your TuneStik. However, your TuneStik Control will allow you to tune the TuneStik FM Transmitter before reverting back to Primary Mode as long as there has not been more than 10 seconds of inactivity (i.e. pressing a button on the remote).

My radio will only scan to occupied FM stations.

Many car radios default to scan mode for tuning, so they automatically tune to a radio station. Most of these radios can be switched to manual tuning (consult your car or stereo manual on how to do this). You can also “find” your TuneStik’s fre- quency by scanning to it. Most likely, your car stereo’s scan function will automati- cally find the TuneStik.

Tech Specs

TRANSMITTER

Dimensions: L2.375" x W0.438" x H1.009" (L60.45mm x W11.13mm x H25.7mm)

Weight: 0.375oz

Antenna: Built-in

Power requirement: iPod connection

Modulation: FM Stereo

Frequencies: 88.1-107.9MHz

Frequency response: 50Hz to 18KHz

Operating range: up to 27ft

FCC compliant: (FCC ID # : UIX0702B)

RF REMOTE

Operating Range: Up to 25ft

Transmission Method: Radio Frequency

Frequency: 433.92 MHz

Remote Battery: Panasonic CR2025 3V

Remote Dimensions: L2.297” x W1.1” x H0.205” (L58.33mm x W27.95mm x 5.21mm)

Remote weight: 0.25oz

FCC compliant: (FCC ID # : UIX0703B)

16 DLO TUNESTIK USER MANUAL 17