2-3 Changing Setting Values
Some of the setting values of the unit can be changed. Those that can be changed are listed in the table below. The method for changing them is explained here.
(1) Release the password lock. (Refer to
(2)Press the UP/DOWN switch (“U” or “V”) until the setting you wish to
change ( “LCD Screen Indication” in the
table below ) is displayed at the bottom right of the LCD display.
(3)Then press the special command switch, and the setting to be changed ( “LCD Screen Indication” in the table below ) and
UP/DOWN switch
Setting to be changed
- - - - -
d1 0
Special command switch