1-3
1.3 Regulatory Notices
UL
Troubleshooting must be performed by trained technicians. Do not attempt
to service the unit unless you are qualified to do so.
WARNING: Check that the units have been set to the correct supply voltage
and that the correct fuses have been installed. To reduce the risk of fire,
replace the fuses only with the same type and rating. Do not use a ground-
lifting adaptor and never cut the ground pin on the three-prong power plug.
UK
Connections for United Kingdom:
WARNING: THIS APPARATUS MUST BE EARTHED.
As the colours of the cores in the mains lead may not correspond with the
coloured markings identifying the terminals in your plug, proceed as
follows:
• The core which is coloured green and yellow must be connected to the terminal in
the plug which is marked with the letter E or by the earth symbol , or coloured
green or green and yellow.
• The core which is coloured blue must be connected to the terminal which is marked
with the letter N or coloured black.
• The core which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
EUROPEAN EMC
The 230V unit complies with the EMC requirements of EN 50081-1, EN
50082-1, prEN 55103-1 and -2 when installed in an E2 environment in
accordance with this manual.
MAIN