WATCHING TV

5TV Screen Display Mode

DTV

2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal.

1 Press [MENU] to display the main menu.

5Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

1 Press [SLEEP] to set the sleep timer.

MENU

2 Use [CH K/L] to select “DTV SETUP”, then press [VOL X].

e.g.) digital TV mode

CH

-

TV SETUP -

 

 

or

PICTURE

 

CH

CHANNEL SETUP

V-CHIP SETUP

 

 

LANGUAGE

[ENGLISH]

 

CAPTION

[OFF]

 

DTV SETUP

 

 

 

 

VOL

3 Use [CH K/L] to select “DTV DISPLAY”, then use [VOL X/Y] to switch the desired TV aspect ratio.

CH

- DTV SETUP -

or

 

CH

DTV DISPLAY [LETTERBOX]

 

DTVCC

VOL or VOL

SLEEP

SLEEP OFF

• Sleep timer display appears on the TV screen.

2 Press [SLEEP] repeatedly to change the amount of time until shut off.

SLEEP

SLEEP 120MIN.

You can set the unit to turn off after a set period of time (from 30 to 120 minutes).

Each press of [SLEEP] will increase the time by 30 minutes.

After set up, the sleep timer display can be called up for checking by pressing [SLEEP].

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “SLEEP OFF“ is displayed on the TV screen.

Note:

• The sleep timer setting display will automatically disappear in a few seconds.

• When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

LETTERBOXZOOM

[LETTERBOX]

Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen.

[ZOOM]

Enlarge and display the center area of the digital- supported program.

The right and left side of image will be cut off.

4 Press [MENU] to exit.

MENU

Note:

You may not switch the display mode depending on the program.

14

EN

Page 14
Image 14
Dolby Laboratories V07TV13 owner manual TV Screen Display Mode, To Cancel the Sleep Timer, Letterbox, Zoom