INSTALLATION

GENERAL INSTRUCTION

This appliance is designed for storage of foods and storage of frozen foods and making ice.

This appliance is certified under the latest edition of ANSI Z21.19•CSA 1.4 Refrigerators using gas fuel.

The installation must conform with local codes, or in ab- sence of local codes, the following standards as appli- cable.

In the U.S. the installation must conform with:

1.National Fuel Gas Code, ANSI Z223.1/NFPA 54 (latest edition).

2.Recreational Vehicles Code, ANSI A119.2 (latest edition)

3.Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.

If an external electrical source is utilized, the refrigera- tor, when installed, must be electrically grounded in ac- cordance with local codes or, in the absence of local codes, the National Electrical Code, ANSI/NFPA 70 - (lat- est edition).

In CANADA, the installation must conform with:

1.Natural Gas and Propane Installation Code, CSA B149.1

2.CSA Z240 RV Series, Recreational Vehicles.

3.Current CSA Z240.4, Gas-equipped Recreational Vehicles and Mobile Housing.

If an external electrical source is utilized, the refrigera- tor, when installed, must be electrically grounded in ac- cordance with local codes or, in the absence of local codes, the Canadian Electrical Code, CSA C22.1, Parts

Iand II - (latest edition).

VENTILATION

The installation shall be made in such a manner as to separate the combustion system from the living space of the mobile home or recreational vehicle. Openings for air supply or for venting of combustion products shall have a minimum dimension of not less than 1/4 inch.

Proper installation requires one lower fresh air intake and one upper exhaust vent. The ventilation kits shown in this instruction manual have been certified for use with the refrigerator models listed in the Table.

For “Certified Vent System Kits” see page 14.

The ventilation kits must be installed and used without modification. An opening toward the outside at floor level in the refrigerator compartment must be provided for ventilation of heavier-than-air fuel gases. The lower vent of the recommended kits is provided with proper size openings. The flow of combustion and ventilating air must not be obstructed.

The lower side vent is fitted with a panel, which provides an adequate access opening for ready serviceability of the burner and control manifold of the refrigerator. This should be centered on the back of the refrigerator.

GAS CONNECTION

Hook up to the gas supply line is accomplished at the manual gas valve, which is furnished with a 3/8" SAE (UNF 5/8" -18) male flare connection. All completed con- nections should be checked for leaks with soapy water.

! WARNING

DO NOT use a flame to check for gas leaks.

The gas supply system must incorporate a pressure regu- lator to maintain a supply pressure of not more than 11 inches water column.

When testing the gas supply system at test pressures in excess of 1/2 psi, the refrigerator and its individual shutoff valve must be disconnected from the gas supply piping system.

When testing the gas supply system at pressures less than or equal to 1/2 psi, the appliance must be isolated from the gas supply piping system by closing its indi- vidual manual shutoff valve.

In case detailed instructions on the installation and con- nection to the gas supply are required, contact your dealer or distributor.

ELECTRICAL CONNECTION

120 Volts AC Connection

The refrigerator is equipped with a three-prong (ground- ing) plug for your protection against shock hazards and should be plugged directly into a properly grounded three-prong receptacle. DO NOT cut or remove the grounding prong from this plug. The free length of the cord is 2 feet and therefore recommended that the re- ceptacle be located to the left side of the refrigerator (viewed from the rear) and approximately 6 inches from the floor (see FIG. 3). This allows easy access through the vent door. The cord should be routed to avoid direct contact with the burner cover, flue cover or any other components that could damage the cord insulation.

120 Volt AC

receptacle

6”

FIG. 3

4

Page 3 Page 5
Page 4
Image 4
Dometic RM3862 General Instruction, Ventilation, GAS Connection, Electrical Connection, Volts AC Connection
Page 3 Page 5

RM3862 specifications

The Dometic RM3862 is a highly regarded absorption refrigerator designed specifically for recreational vehicles, campervans, and boats. This model is part of the Dometic’s RM series, known for its reliable performance and energy efficiency, making it a preferred choice among travelers and outdoor enthusiasts.

One of the standout features of the Dometic RM3862 is its dual power source capability. It can operate on both 12V DC and 230V AC power, as well as utilizing gas, which provides users with flexibility depending on their energy availability. This versatility ensures that whether you're camping off-grid or plugged into a campsite's electrical supply, the RM3862 can meet your refrigeration needs.

The refrigerator has a generous capacity of 135 liters, providing ample space for food and beverages, making it ideal for long trips or families on the go. The interior is well-organized with adjustable shelves, ensuring optimal storage options for various sizes and shapes of items. The design includes a vegetable crisper and a dedicated bottle shelving, catering to the different needs of users.

Another notable characteristic of the Dometic RM3862 is its advanced absorption technology. This cooling method is particularly quiet, eliminating the noise often associated with compressor refrigerators. This feature enhances the comfort of the living space, especially for those who are sensitive to background noise while resting or sleeping.

In terms of design, the RM3862 sports a sleek and modern exterior, available in a variety of finishes to match the aesthetic of different vehicles. The door is reversible, allowing for flexible installation depending on your space needs. This adaptability is a significant advantage for RV owners looking to optimize their internal layout.

Energy efficiency is a key consideration in the Dometic RM3862’s design. It operates with a low power consumption, ensuring users can run their refrigerator without excessive drain on their battery systems, which is especially important for boondocking and extended stays away from traditional power sources.

In summary, the Dometic RM3862 is a reliable, versatile, and efficient absorption refrigerator, ideal for mobile living environments. With its dual power capabilities, ample storage capacity, user-friendly design, and quiet operation, it meets the varied needs of adventurers who value convenience and functionality in their refrigeration solution. Whether on a weekend getaway or an extended road trip, the RM3862 is a dependable companion that helps users enjoy their food and drinks wherever they travel.
Top Page Image Contents