Dometic RM660, RM760 Instructions for Mounting the Door Panel, Panel dimensions Thickness max /32

INSTRUCTIONS FOR MOUNTING THE DOOR PANEL

The refrigerator is normally delivered without door panel(s). Before starting the mounting work check that the panel di- mensions are in compliance with those given in the table and read the instructions through. When mounting the panel, pro- ceed as follows.

A.Remove the top decoration strip (2) with its two screws

(1).

B.Insert one of the vertical edges of the panel into the groove of the door frame (3).

C.Bend the panel gently so that the free side of the panel can be slipped into the corresponding groove of the door frame (4).

D.Push the panel downwards so that the lower horizontal edge of the panel is fitted into the bottom groove (5).

E.Between the upper edge of the panel and the door frame there is now a gap which should be covered by the de- coration strip.

F.Put the strip across the door so that the gap is covered and push it upwards (6).

The tabs on the inside of the strip should fit in behind the flange of the door frame. Secure the decoratlon strip by means of the two screws (1).

Panel dimensions

Thickness max. 5/32”

T		HEIGHT		1	WIDTH		1
	L
TYPE		MAX.	MIN.		MAX.	MIN.
RM 360		636	633		516.5	513.5 mm
		25”	24 7/8		20 11/32	20 7/32 inch
RM 460		679	676		550.5	547.5 mm
		26 23/32	26 19/32		21 11/16	21 9/16 inch
RM 660		879	876		550.5	547.5 mm
		34 5/8	34 1/2		21 11/16	21 9/16 inch
RM 760		288	285		550.5	547.5 mm
upper		11 11/32	11 7/32		21 11/16	21 9/16 inch
RM 760		801	798		550,5	547.5 mm
lower		31 17/32	31 13/32		21 11/16	21 9/16 inch
RM 1300		360	357		598.5	595.5 mm
upper		14 3/16	14 1/16		23 9/16	23 7/1 6 inch
RM 1300		879	876		598.5	595.5 mm
lower		34 5/8	34 1/2		23 9/1 6	23 7/1 6 inch

HK-M 7937 820 47 96

FPC 119 RM-3-4-6-7-13