Dometic RM7030, RM7732 service manual Securing the Refrigerator

DOMETIC® RM7030/RM7732 Refrigerators

DIAGNOSTIC SERVICE MANUAL

RM7732:

SECURING THE REFRIGERATOR:

After the refrigerator is mounted in place (ensuring a combustion seal at the front frame), the refrigerator is to be secured in the enclosure with six screws. The screws have to be installed in the following order:

STEP 1: Two screws installed through the front base, which includes the lower front strip installa- tion.

The refrigerator is provided with a lower front strip (shipped as a loose part). The front strip is to be attached after the refrigerator is set into the cutout opening.

A. Install the lower front strip by maneuvering it under the bottom hinge plates, as shown in FIG. 7.

FIG. 7

B. Secure the refrigerator and the lower front strip with two screws: One screw through each hinge. See FIG. 8.

FIG. 8

STEP 2: Install the two screws in the top frame.

A.The top decoration panel must be removed from the refrigerator before the screws can be in- stalled. Open refrigerator door and gently push the tabs out of the hole in the hinge with flat blade screwdriver. See FIG. 9.

B.Carefully tilt the top decoration panel and lift up to remove from top frame. See FIG. 9.

FIG. 9

USE SCREWDRIVER

TO PUSH TABS OUT

OF HOLE

C.Install the second two screws in the top frame as shown in FIG. 10.

FIG. 10

STEP 3: Two screws installed in the rear base.

See FIG. 11

FIG. 11

Screws

Failure to follow the sequence in securing refrigera- tor in the enclosure can cause leakage between the frame and cabinet.

26