DIAGNOSTIC SERVICE MANUAL

DOMETIC® RM7030/RM7732 Refrigerators

3.Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.

4.When operating in the AES mode, the AES mode indicator lamp "B" will illuminate. The control system will automatically select between AC and GAS operation with AC having priority over GAS. Either the AC indicator lamp "A" or the GAS indicator lamp "C" will illuminate depending on the energy source selected by the control system. If the control system is operating with AC energy and it then becomes unavailable, the system will automatically switch to GAS. As soon as AC becomes available again, the control will switch back to AC regardless of the status of GAS operation.

GAS MODE

1.Move the AES mode selector button (2) to the UP position. The GAS mode indicator lamp "C will illuminate. After 45 seconds the burner should be ignited and operating normally.

2.On the initial refrigerator start-up, it may take longer than 45 seconds to allow air to be purged from the gas line. If the gas does not ignite within 45 seconds, the CHECK indicator lamp "D" will illuminate and the GAS mode indicator lamp "C" will go off. To reset when the CHECK indicator lamp "D" is illuminated, press the main power ON/OFF button (1) to the OFF then ON position.

If the control is switched to AC operation while the CHECK indicator lamp is on, it will function properly, but the CHECK indicator lamp will not go off until the main power ON/OFF button is pressed to the OFF then ON position.

NOTE: Do not continue to reset GAS operation if the CHECK indicator lamp continues to be illumi- nated after several tries. If repeated attempts fail to start the LP gas operation, check to make sure that the LP gas supply tanks are not empty and all manual shutoff valves in the lines are open.

3.Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.

THERMOSTAT

The thermostat on the refrigerator controls both the gas and electric operation, thereby eliminating the necessity of resetting each time a different energy source is employed.

After the initial start-up, the thermostat should be moved from "COLDEST" to the desired temperature setting, usually about mid-setting.

STANDBY MODE OF OPERATION

This control system contains a feature where it will continue to operate the cooling system in the event of a failure of a major operating component. Two different modes of operation can occur in this category.

If for some reason the display module becomes non- functional, the control system will revert to fully auto- matic operation – selecting the best energy source available with AC and GAS priority. The temperature of the refrigerator will be maintained at the MID position within normal temperature tolerances. The power module will continually attempt to reestablish operation of the display module.

The second standby mode of operation will execute when a failure of the temperature sensing device or associated electronic circuitry occurs. If this should occur, the control system will operate on the energy source selected via the control panel. The cooling unit will run continuously on the selected energy source. The refrigerator will continue to operate in this mode indefi- nitely or until a new sensor is installed and the system is reset.

1.3RM7732 REFRIGERATOR OPERATION

2-WAY DISPLAY PANEL

B

A C DE

AUTO MODE

Press the AUTO mode selector button (2) to the DOWN position. If 120 volts AC is available, the AC mode indicator lamp (A) will illuminate indicating AC operation. If 120 volts AC is not available, the GAS mode indicator lamp (C) will illuminate and the control system will automatically switch to GAS operation.

If the CHECK indicator lamp (D) illuminates and the GAS mode indicator lamp (C) is OFF, the controls have failed to ignite the burner in the GAS mode. GAS operation may be reset by pressing the main power ON/ OFF button (1) to the OFF then ON position. (See GAS MODE.

Press the TEMPERATURE SELECTOR button (3) until the lamp at the desired position is illuminated.

7

Page 10
Image 10
Dometic RM7030 GAS Mode, Standby Mode of Operation, RM7732 Refrigerator Operation, Auto Mode, WAY Display Panel

RM7030, RM7732 specifications

The Dometic RM7732 and RM7030 are two innovative refrigeration solutions designed for those who enjoy outdoor adventures such as camping, RVing, and boating. These refrigerators are engineered to provide reliable cooling performance while prioritizing energy efficiency and ease of use.

The Dometic RM7732 is a three-way refrigerator that operates on 12V DC, 110V AC, and propane. Its versatility makes it an ideal choice for those who may not always have access to an electric power source. With a capacity of 7.3 cubic feet, it can hold a substantial amount of food and beverages, making it perfect for extended trips. The RM7732 also boasts an impressive temperature range, allowing it to maintain optimal cooling conditions even in varying outdoor temperatures. Its sleek design includes a reversible door, providing flexibility in installation and use.

On the other hand, the Dometic RM7030 is a double-door refrigerator that combines style with functionality. This model also supports three-way operation: propane, 12V DC, and 110V AC. It offers a slightly smaller capacity than the RM7732 but is still equipped to handle the needs of a small family or group. One of its standout features is its efficient absorption cooling technology, which ensures that the refrigerator operates quietly, making it an excellent choice for nighttime use.

Both models feature an electronic ignition system that simplifies the process of starting the propane function. The intuitive control panel on each unit allows users to easily select the preferred power source and adjust the temperature settings. Energy-efficient LED lighting inside the refrigerators enhances visibility while consuming minimal power.

Dometic has incorporated advanced insulation materials in both the RM7732 and RM7030 to reduce energy consumption, ensuring that food stays cooled even under high ambient temperatures. The sturdy construction is designed to withstand the rigors of outdoor use, and the units are built to last.

In summary, the Dometic RM7732 and RM7030 refrigerators are excellent choices for outdoor enthusiasts seeking reliable, versatile, and energy-efficient cooling solutions. With their range of power options, impressive capacities, and user-friendly features, they are well-equipped to handle the demands of any adventure while keeping your provisions fresh and cool.