This item lets you disable the built-in parallel port, or enable it by assigning an I/O address and an Interrupt Request Line (IRQ).

Parallel Port Mode

Default: ECP

ECP Mode Use DMA

Default: 3

This item defines the operation of the parallel port. If you are connected to a parallel device that supports the higher- performance EPP (enhanced parallel port) or the ECP (extended capabilities port) make the appropriate changes to this item.

PWRON After PWR-Fail

Default: Off

If this item is enabled, the system will automatically resume when power is restored after an interruption in the power supply.

Game Port Address

Default: 201

This item lets you disable the built-in game port, or enable it by assigning an I/O address.

Midi Port Address

Default:330

Midi Port IRQ

Default: 10

This item lets you disable the built-in MIDI port, or enable it by assigning an I/O address. If you enable the MIDI port, use the following item Midi Port IRQ to assign an Interrupt Request line to the port.

53

Page 55
Image 55
IBM 2169 manual Parallel Port Mode, ECP Mode Use DMA Default, Pwron After PWR-Fail, Game Port Address, Midi Port Address