006 - ARE THE VOLTAGES CORRECT AND DOES THE FAN RUN? (YES, READ AHEAD. NO, GO TO STEP 009)
qThe power supply is working normally.
qIf you suspect the on/off switch cable assembly, see Step 003.
qIf the fan continues to run when all connectors are plugged back in, go to “Undetermined Problems” on page 104. If the fan stops running when a drive connector is plugged back in, go to "Start" on page 68.
007 - DO YOU HAVE AN OHM READING WHEN THE SWITCH IS PRESSED AND AN OPEN READING WHEN THE SWITCH IS RELEASED? (YES, READ AHEAD. NO, GO TO STEP 008)
qReplace the on/off switch cable assembly.
008 -
qReplace the system board.
qEnd.
009 -
qReplace the power supply.
qEnd.
101