94
004 -
q Perform the following under Windows 98.
NOTE: If an operating system other than Microsoft
Windows 98 is installed, the program screens and
icons may differ from these instructions.
1. Start Microsoft Windows 98.
2. Select the Start icon.
3. Select Settings, then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the Names
field. (To test other adapter card software, select an
action from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN OTHER
SOFTWARE, SELECTABLE ON THE SCREEN
(SHOWN IN BLACK AND NOT GRAY)? (YES, GO TO
STEP 006. NO, READ AHEAD.)
q Make sure that Windows 98 is properly installed.
q Go to step 001.
006 -
q Select the Preview button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE SPEAKER?
(YES, READ AHEAD. NO, GO TO STEP 008.)
q The audio feature is functioning normally. Click Cancel to
close the dialog box. Exit Microsoft Windows 98.
q If the symptom remains or has changed, go to “Index of
Symptoms, Messages, Error Codes, or Beeps” on page
74.
q End.
008 -
q Make sure that the volume control is not turned low.
q Make sure that the speaker and its adapter are not
damaged.
q Make sure that the speaker is plugged in speak-out jack.
Refer to the connectors and functions illustrated in chapter
5.
q If the error cannot be resolved, replace the system board.
q End.