002 - IS THE SCREEN READABLE? (YES, READ AHEAD. NO, GO TO STEP 004)
NOTE: If the screen shows a blinking cursor with no memory count running, answer this question "No".
qSelect Interactive Tests from the Main Menu.
qSelect and execute Video test from the menu.
qFollow the prompts and perform the video test.
qGo to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 74.
NOTE: You might have to adjust the monitor controls to obtain the best image.
003 - DOES THE MONITOR SUCCESSFULLY PASS ALL TESTS? (YES, READ AHEAD. NO, GO TO STEP 004)
qYou have successfully completed the video diagnostics tests. If the problem remains, go to “Index of Symptoms, Messages, Error Codes, or Beeps” on page 74.
qEnd.
004 -
qPower off the system unit.
qRemove the hard disk drive system cable.
qPower on the system unit.
005 - IS THE SCREEN READABLE?
qReplace the monitor. If the symptom remains, replace the system board.
qEnd.
103