Volvo
INSTALLING THE SUPPLY AIR DISTRIBUTION
For the
Connecting to the Volvo Ductwork
First, remove the rubber duct transition that is located in the
Remove the duct from the truck, and cut a 4” hole as shown in the photograph (Fig. 12).
Find the V4 RND black 4" round grill. Trim the flange on two sides, as shown in the photographs (Figs. 13- 14), so it will fit into the duct transition.
Rubber duct transition
Figure 11 - Duct transition location
Figure 12 - Hole cut in duct transition
Figure 13 - First trimming cut on 4" grill
Figure 14 - V4 RND trimmed to fit
ENGLISH