Doro 20 Answer machine only NeoBio 15r/25r, Switching the answer machine on/off, Outgoing message

English

Answer machine (only NeoBio 15r/25r)

When the answer machine is switched on calls are answered after a set number of rings, your outgoing message is heard and the caller can leave a message. Total memory capacity is up to 15 minutes depending on the set sound quality (NeoBio 15r), or 30 min (NeoBio 25r). Most functions can be accessed from both base unit and handset.

Switching the answer machine on/off

Press 1 (on the base unit) to switch the answer machine off/on. If the base unit’s display is flashing/ showing --the answer machine is disconnected, or time/date is not set.

Off/On from the handset

1. Press . Scroll to ANS. MACHINE. Press OK.

2.Scroll to TAM OFF/ON. Press OK.

3.Scroll to desired setting. Press OK.

If the handset’s display shows with a steady light the answer machine is switched on. If there are new messages, the indicator will flash whether the answer machine is off or on.

Even when answer machine is OFF it will still answer after 10 rings, please see Remote activation.

Outgoing message

The outgoing message (max 3 min) is heard by incoming calls. There are two separate outgoing messages, one for Answer only (callers cannot leave a message) and one for normal answering function. Please also select desired answer function. See TAM Settings.

1. Press . Scroll to ANS. MACHINE. Press OK.

2.Scroll to TAM SETTINGS. Press OK.

3.Scroll to OGM SETTINGS. Press OK.

4.Scroll to ANSWER&REC/ANSWER ONLY. Press OK.

5.Scroll to Record MESS. Press OK.

6.After the long beep you can record your message (speaking 20 cm from the keypad). Press OK.

7.The message will be played back to you. Repeat the above to change.

A pre-recorded message is used until you make your own recording, and that message can also be restored if required. To restore this, press C (right menu button) during playback of outgoing message.

Screening

Incoming messages will be heard on the loudspeaker of the base unit as they are received. If nothing can be heard, check that the volume is turned up and that the function has been activated – see separate description Answer machine settings. You can also press OK on the handset while recording is in progress. The call can be intercepted by pressing q or lifting the receiver of another telephone connected to the same line.