English
Connection
1.Connect the curly cord to the handset and to the socket marked qon the underside of the telephone.
2.Connect the telephone line cord to the socket marked T on the underside of the telephone, and then to a telephone network wall socket.
3.You will hear a click when the modular plug is correctly in place.
4.Lift the handset and listen for the dial tone. Your telephone is now operational.
5.Australia/New Zealand only: Ensure that the recall button timing switch underneath the telephone is correctly set (100 ms AUS or 600 ms NZ).
Mute button
Press and hold z to disable the handset microphone, release z to reconnect the microphone.
Redial function
When the number dialled is engaged or if you wish to redial the last number dialled, lift the handset and press r.
Volume control
The handset earpiece volume may be adjusted using 
located on the side of the telephone.
Ringer
The ringer volume can be adjusted to high or low using located on the underside of the telephone.
Recall
Access to additional network services such as “Call Waiting” can be gained by using the recall button R. Example: when the call waiting tones are heard, press R, listen for the dial tone, then press 2. Please note that some networks require only the R button to be pressed, contact your network operator for more services information.
If this product is connected to a business PBX system, press the recall button R followed by the extension number to transfer a call. The standard setting is 100 ms for UK/Australia and 600 ms for New Zealand.
