Doro PMR 510 manual Belt clips, Range, Headset, Turning the handset On/Off

English

Setting Up

Belt clips

A belt clip is included, which can be fitted on the back of the handset once the batteries have been installed. The belt clip allows the handset to be attached to a belt, waistband or similar.

To remove, lift the small tab at the top of the clip and simultaneously push upwards.

Range

The communication range is dependent on many factors, with the maximum range being achieved when there are no obstacles in the transmission path (line of sight). Under optimum conditions the maximum range can be up to 5km.

There will be a reduction in the range when the units are used in built up areas, undulating terrains and vehicles.

Headset

The handset can be used with the headset supplied in the optional Accessory Pack (pmr a-pack) which can be purchased from your local DORO retailer. When the headset is connected, the microphone and speaker on the handset are automatically disconnected, all other functions remain unchanged.

Please note!

Use only DORO original headsets with these PMR units.

Adjust the Call signal and headset volume immediately upon connecting a headset, as these settings may initially be too loud.

Turning the handset On/Off

To turn the handset On or Off press and hold the !button (1-2 seconds) until a tune is heard.

4 www.doro.com