Draper 1000 PAINT , BRICK LAYOUT

PAINT

Only clean your stove with a dry soft cloth that will not harm the paint finish.

If the paint becomes scratched or damaged, it is possible to give your wood stove a brand

new look, by repainting it with a 1200o F heat resistant paint. For this purpose, simply

scrub the surface to be repainted with fine sand paper, clean it properly, and apply thin

coats (2) of paint successively. Refer to page 16 of the present manual for the paint curing

process.

BRICK LAYOUT

Contents

Main OWNER`S MANUAL READ AND KEEP THIS MANUAL FOR REFERENCE TABLE OF CONTENTS LIMITED LIFETIME WARRANTY INTRODUCTION TECHNICAL SPECIFICATIONS DOOR ADJUSTMENT THE BENEFITS OF INSTALLING A BLOWER INSTALLATION POSITIONING THE STOVE FLOOR PROTECTOR FRONT 18 (460 mm) SIDES 8 (200 mm) BACK 8 (200 mm) CLEARANCES FROM COMBUSTIBLES In Australia REDUCED CLEARANCES Reducing Clearances With Shielding TYPE OF PROTECTION CHIMNEY CHIMNEY CONNECTOR (STOVE PIPE) TYPICAL INSTALLATIONS Page OUTSIDE COMBUSTION AIR WOODSTOVE UTILISATION AVERAGE ENERGY YIELD OF ONE AIR DRIED CORD OF CUT WOOD TESTING YOUR WOOD THE FIRST FIRES IGNITION HEATING RELOADING CREOSOTE FORMATION AND NEED FOR REMOVAL TO PREVENT CREOSOTE BUILD UP ASH DISPOSAL MAINTENANCE GLASS GOLD DOOR CLEANING GASKETING PAINT BRICK LAYOUT TROUBLESHOOTING LIMITED LIFETIME WARRANTY DESCRIPTION