Draytek VIGOR2910

Vigor2910 Series User’s Guide

Always On - If the broadband connection is no longer available,

the backup line will be activated automatically and always on until

the broadband connection is restored. We recommend you to

enable this feature if you host a web server for your customers’

access.

PPP/MP Setup PPP Authentication – Select PAP only or PAP or CHAP for

PPP.

Idle Timeout – Set the timeout for breaking down the Internet

after passing through the time without any action. This setting is

active only when the Active on demand option for Active Mode is

selected in WAN>> General Setup page.

IP Address

Assignment Method

(IPCP)

Usually ISP dynamically assigns IP address to you each time

you connect to it and request. In some case, your ISP provides

service to always assign you the same IP address whenever

you request. In this case, you can fill in this IP address in the

Fixed IP field. Please contact your ISP before you want to use

this function.

WAN IP Alias - If you have multiple public IP addresses and

would like to utilize them on the WAN interface, please use WAN

IP Alias. You can set up to 8 public IP addresses other than the

current one you are using.

Fixed IP – Click Yes to use this function and type in a fixed IP

address in the box of Fixed IP Address.

Default MAC Address – You can use Default MAC Address or

specify another MAC address by typing on the boxes of MAC

Address for the router.

Specify a MAC Address – Type the MAC address for the router

manually.

After finishing all the settings here, please click OK to activate them.