Draytek VIGOR2910

Vigor2910 Series User’s Guide 27

specific MAC address for access authentication. In such cases you

need to click the Specify a MAC Address and enter the MAC

address in the MAC Address field.

DNS Server IP

Address Type in the primary IP address for the router if you want to use

Static IP mode. If necessary, type in secondary IP address for

necessity in the future.

To use PPTP as the accessing protocol of the internet, please choose Internet Access from

WAN menu. Then, select PPTP mode for WAN2. The following web page will be shown.

PPTP Setup PPTP Link - Click Enable to enable a PPTP client to establish a

tunnel to a DSL modem on the WAN interface.

PPTP Server - Specify the IP address of the PPTP server.

ISP Access Setup Username -Type in the username provided by ISP in this field.

Password -Type in the password provided by ISP in this field.

Index (1-15) in Schedule Setup - You can type in four sets of time

schedule for your request. All the schedules can be set previously

in Application – Schedule web page and you can use the number

that you have set in that web page.

ISDN Dial Backup

Setup This setting is available for the routers supporting ISDN function

only. Before utilizing the ISDN dial backup feature, you must

create a dial backup profile first. Please click Internet Access

Setup > Dialing to a Single ISP to enter the backup profile.

Due to the absence of the ISDN interface in some models, the

ISDN dial backup feature and its associated setup options are not

available to them. Please refer to the previous part for further

information.

None - Disable the backup function.