Dream Vision DM 7000-S

16. DreamUp – operating software update

You can obtain the DreamUp software and the operating software from

www.dm7000.de .

!!! Please study these instructions thoroughly

before you begin !!!

In order to connect the Dreambox with your computer, you need a PC with a

network card and a serial interface (COM1 or COM2), and a crossover patch

cable and a null modem cable. Alternatively, you can connect the PC with the

Dreambox, without a crossover patch cable, with a normal patch cable via

your router, hub or switch. If you do not have a patch cable, you can also

connect to the Dreambox with just a serial cable (uploads and downloads

take longer). In these instructions, we assume that create a connection with

the Dreambox over both interfaces, serial and Ethernet. If many questions

arise, ask your dealer for assistance, or contact our technical hotline at

www.dream-multimedia-tv.de.

Please remove all cables from your Dreambox.

Plug only the serial cable and the patch cable into

your Dreambox.

The power cable is unplugged.

How to find out the IP address of your computer under Windows (W98,

W2K, XP):

Click on Start -> Run -> type in the command „Command“ -> press return.

A DOS command window will open, Type in the command „ipconfig/all“ and

press return. The IP address of your computer will then be displayed.

Note down the IP address and the subnet mask (can´t do any harm).

16. DreamUp – operating software update