DM 2610933927
| Glue Gun Safety Instructions | |
! WARNING | Read and understand all instructions. Failure to follow all instructions | |
injury. | listed below may result in electric shock, fire, and/or serious personal | |
SAVE THESE INSTRUCTIONS | ||
|
|
| Melted glue will burn | ||
! | WARNING | |||
| skin; operating | nozzle | ||
temperature is 380 deg F. Do not touch | ||||
melted glue or nozzle area. If accidental | ||||
contact occurs, do not remove glue. | ||||
Immediately put burned area into cold | ||||
water. Always wear protective clothing, | ||||
safety glasses, gloves, long sleeve shirt | ||||
and long pants. Keep out of reach of | ||||
children. Keep away from flammables. | ||||
Unplug when not in use. No user service- | ||||
able parts inside. Manufacturer assumes | ||||
no responsibility for consequential or indirect | ||||
damages from the use of this product. | ||||
|
| Handling | the | coated |
! | WARNING | |||
| electrical | wires | of this | |
product exposes you to lead, a chemi- | ||||
cal known to the State of California to | ||||
cause cancer, birth defects and other | ||||
reproductive harm. Wash hands after | ||||
handling. | Do not attempt to melt | |||
! | CAUTION | |||
| crayons or candles. Do | |||
not use any material other than recom- mended glue sticks. Permanent damage to the glue gun could result.
The glue gun is on as soon as it is plugged in. Do not leave unattended.
When glue gun is hot, do not lay on its side. Always use stand.
Do not use hot melt glue to replace structural fasteners. The adhesive used with this glue gun will begin to soften at 140 deg F. Don't use the glue on objects that will be subjected to temperatures of 140 deg F or above.
Avoid accidental discharge. Do not touch glue stick or trigger except to dispense glue. Feeding or pushing glue stick with too much force into heated gun may cause hot glue to be unexpectedly expelled from nozzle or to flow back from inlet tube.
Do not pull glue sticks from gun. The feed mechanism may become damaged or impaired. If you desire to change types of glue, cut off protruding end and feed the remainder through with the new type of glue.
Do not store the glue gun in direct sunlight for extended periods.
Never attempt to force cool the gun after use by immersing any part of it in water or any other liquid. Allow the gun to air cool only. Allow glue gun to cool before storing. Do not change nozzles while glue gun is in “on” position, plugged in, or warm to the touch. Before changing nozzles, make sure glue gun is cool to the touch, unplugged, and the switch is in the “off” position.
This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
This glue gun contains no user serviceable parts. Do not use glue gun if cord is damaged. Damaged cords increase the risk of electric shock.
2
