Dremel 4000 manual Chain Saw Sharpening Stones, Cutting Accessories, Polishing Accessories

DM 2610005595 05-09:DM 2610005595 05-09 5/27/09 2:39 PM Page 19

Speed Settings (Continued)

*Speed for light cuts; Caution - burning on deep grooves.

•Depending on cutting direction relative to grain.

Note: Each number settings listed in the speed charts = 000 RPM’s

Chain Saw Sharpening Stones

Catalog	Soft	Hard	Laminates	Steel	Aluminum,	Shell/	Ceramic	Glass
Number	Wood	Wood	/Plastic		Brass, etc.	Stone
453, 454,	-	-	-	25-35	-	-	-	-
455

Cutting Accessories

Catalog	Soft	Hard	Laminates	Steel	Aluminum,	Shell/	Ceramic	Glass
Number	Wood	Wood	/Plastic		Brass, etc.	Stone
409, 420, 426	-	-	5-11	25-35	25-35	25-35	25-35	-
540, EZ409
542, EZ544	25-35	18-35	5-11	-	-		-	-
545, EZ545	18-35	18-24	-	-	-	12-24	12-24	-
560	For use on drywall. For best results, use at 30,000 rpm.
561	12-35	12-35	5-11	-	25-35	-	-	-
562	-	-	-	-	-	-	25-35
EZ456	-	-	-	25-35	25-35	-	-	-
EZ476	-	-	5-11	-	-	-	-	-

Polishing Accessories

Catalog	Soft	Hard	Laminates	Steel	Aluminum,	Shell/	Ceramic	Glass
Number	Wood	Wood	/Plastic		Brass, etc.	Stone
461, 462, 463	-	-	-	18-24	18-24	18-24	18-24	18-24
414, 422, 429	-	-	-	12-17	12-17	12-17	12-17	12-17
425, 427	-	-	-	18-24	18-24	-	-	-
423E	-	-	-	12-24	5-8	5-8	5-8	12-24
403, 404, 405	9-11	9-11	5-11	12-15	5-8	-	-	-
530, 531, 532	-	9-11	-	9-11	-	-	-	-
428, 442, 443	9-11	9-11	5-8	9-11	9-11	-	-	-
535, 536, 537	9-11	9-11	-	9-11	9-11	9-11	-	-

Sanding Bands and Discs

Catalog	Soft	Hard	Laminates	Steel	Aluminum,	Shell/	Ceramic	Glass
Number	Wood	Wood	/Plastic		Brass, etc.	Stone
430, 431, 438	5-35	5-35	5-17	25-35	25-35	5-35	5-35	-
439, 440, 444	5-35	5-35	5-17	25-35	25-35	5-35	5-35	-
407, 408, 432	5-35	5-35	5-17	25-35	25-35	5-35	5-35	-
411, 412, 413	12-17	12-17	5-8	-	5-8	-	-	-

19