Slide ON/OFF Switch, Electronic Feedback

DM 2610958399 07-08.qxp 8/6/08 2:15 PM Page 9

SLIDE "ON/OFF" SWITCH

The tool is switched "ON" by the slide switch located on the topside of the motor housing.

TO TURN THE TOOL "ON", slide the switch button forward.

TO TURN THE TOOL "OFF", slide the switch button backward.

ELECTRONIC FEEDBACK

Your tool is equipped with an internal electronic feedback system that provides a “soft start”, which will reduce the stresses that occur from a high torque start. The system also helps to keep the preselected speed virtually constant between no-load and load conditions.

VARIABLE SPEED CONTROL DIAL

This tool is equipped with a variable speed control dial (Fig. 6). The speed may be controlled during operation by presetting the dial in any one of ten positions.

FIG. 6

VARIABLE SPEED

CONTROL DIAL

OPERATING SPEEDS

The Dremel Multi-Max consists of an AC universal motor and oscillating mechanism to perform applications such as cutting, grout removal, scraping, sanding and more.

The Dremel Multi-Max has a high oscillating motion of 10,000 - 21,000 opms. The high speed motion allows the Dremel Multi-Max to achieve with excellent results. The oscillating motion allows the dust to fall to the surface rather than slinging particles into the air.

To achieve the best results when working with different materials, set the variable speed control to suit the job (See Speed Chart on Page 10 for guidance) . To select the right speed for the accessory in use, practice with scrap material first.

NOTE: Speed is affected by voltages changes. A reduced incoming voltage will slow the OPM of the tool, especially at the lowest setting. If your tool appears to be running slowly, increase the speed setting accordingly. The tool may not start at the lowest switch setting in areas where outlet voltage is less than 120 volts. Simply move the speed setting to a higher position to begin operation.

The variable speed control settings are marked on the speed control dial. The settings for approximate OPM’s are:

Switch Setting	Speed Range
	/min (OPM)
2	10,000-11,000
4	11,000-13,000
6	13,000-16,000
8	16,000-19,000
10	19,000-21,000

You can refer to the charts on next page to determine the proper speed, based on the material and accessory being used. These charts enable you to select both the correct accessory and the optimum speed at a glance.

-9-

6300 specifications

The Dremel 6300 is a versatile rotary tool specifically designed for a wide range of DIY projects and crafts. Known for its compact size and lightweight design, the Dremel 6300 offers exceptional control and precision, making it an ideal choice for both beginners and experienced hobbyists. This innovative tool is part of the Dremel family, a brand synonymous with quality and durability in the realm of rotary tools.

One of the standout features of the Dremel 6300 is its variable speed control. This tool allows users to adjust the rotational speed between 5,000 to 35,000 RPM, facilitating different material handling and project requirements. Whether you are cutting through wood, grinding metal, or polishing delicate surfaces like glass, the ability to fine-tune the speed significantly enhances the tool's versatility.

Equipped with a powerful motor, the Dremel 6300 delivers consistent performance even under heavy use. This motor is engineered with advanced cooling technology that minimizes overheating and ensures longevity. The tool also boasts a flexible shaft attachment, allowing users to work in tight spaces and achieve greater maneuverability on intricate projects.

Dremel's Quick Change Chuck feature is another notable characteristic of the 6300 model. It enables users to change out accessories quickly and conveniently, which is essential for projects requiring multiple attachments. The tool is compatible with a vast array of Dremel attachments and accessories, from cutting and grinding bits to polishing pads and sanding drums, making it a truly versatile tool for any craftsperson.

Moreover, the ergonomic design of the Dremel 6300 provides a comfortable grip during extended use. This emphasis on user comfort ensures that the tool can be used for prolonged periods without causing fatigue. Additionally, the balanced weight distribution enhances stability, giving users more confidence when performing intricate tasks.

In summary, the Dremel 6300 is an excellent rotary tool that combines power, precision, and versatility. With its variable speed control, robust motor, flexible shaft, and user-friendly features, the Dremel 6300 is an essential addition to the toolkit of anyone who enjoys crafting or DIY projects. Whether you are a seasoned professional or just starting, the Dremel 6300 will help unlock your creative potential.

Dremel 6300 Slide ON/OFF Switch, Electronic Feedback, Variable Speed Control Dial, Switch Setting

Models: 6300