Drive Medical Design AS 5000 instruction manual Contents

Models: AS 5000

1 8
Download 8 pages 47.17 Kb
Page 2
Image 2
CONTENTS

CONTENTS

 

IMPORTANT SAFEGUARDS

2

1. INTRODUCTION

3

2. PRODUCT DESCRIPTION

4

3. INSTALLATION

5

4. OPERATIONS

7

5. CLEANING

8

6. MATTRESS STORAGE

9

7. MAINTENANCE

9

8. TECHNICAL DESCRIPTION

10

APPENDIX A: EMC INFORMATION

12

a/ The ISM (industrial, scientific and medical) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz;13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz.

b/ The compliance levels in the ISM frequency bands between 150 kHz and 80 MHz and in the frequency range 80 MHz to 2.5 GHz are intended to decrease the likelihood that mobile/portable communications equipment could cause interference if it is inadvertently brought into patient areas. For this reason, an additional factor of 10/3 is used in calculating the recommended separation distance for transmitters in these frequency ranges.

c/ Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the device is used exceeds the applicable RF compliance level above, the device should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the device.

d/ Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

Recommended separation distances between portable and mobile RF communications equipment and this device:

This device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of this device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and this device as recommended below, according to the maximum output power of the communications equipment

Rated maximum

Separation distance according to frequency of transmitter m

 

output power

 

 

 

of transmitter

150 kHz to 80 MHz

80 MHz to 800 MHz 800 MHz to 2,5 GHz

W

d = 1.2

P

d = 1.2

P

d = 2.3

P

0.01

0.12

 

0.12

 

0.23

 

0.1

0.38

 

0.38

 

0.73

 

1

1.2

 

1.2

 

2.3

 

10

3.8

 

3.8

 

7.3

 

100

12

 

12

 

23

 

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects, and people.

1

14

Page 2
Image 2
Drive Medical Design AS 5000 instruction manual Contents