installation
Mounting Bracket
1.Remove screws (A) from brackets.
2.Mount brackets on handlebar. They can be mounted at any position along the handlebar and can be mounted with the opening facing the inside or the outside of the handlebar.
3.Tighten screws.
NOTE: On Model # CE OBESE XL the mounting brackets are placed in the center of the handgrips. Cut handgrip with knife to the size of bracket and then mount the bracket.
Bracket Mounted Towards Outside
Bracket Mounted on
Safety RollerBracket Mounted on
CE OBESE XL
Forearm Platform
Insert vertical handgrip and post (C) into forearm platform tube (D). Post can be inserted on either side of tube to allow for additional adjustability.
adjustments
1.Loosen mounting bracket knob (B) and place forearm platform post into the mounting bracket opening.
2.Rotate forearm platform inward or outward to appropriate position.
3.Tighten mounting bracket knob (B).
4.Determine forearm platform height by setting collar
(E) at the appropriate height adjustment hole on
the post.
5.Position forearm platform at the height desired.
6.Loosen knob (F) to pronate or supinate the vertical handgrips. Tighten knob at desired position.
7.Loosen knob (F) to extend or shorten the distance between the vertical handgrip and the forearm trough. Tighten knob at desired position.
8.Loosen ratchet handle (G) to adjust angle of vertical handgrip. Tighten handle at desired position.
9.Secure arm in forearm trough with Velcro strap.
C
D | D |
|
|
|
|
|
|
|
|
|
|
|
|
|
| F |
|
|
|
| G |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| E |
| ||
| E |
|
| ||||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
Bracket Mounted Towards Inside