OPERATION

BRAKING

Electro-magnetic brake: Release the speed control lever completely, and the electromagnetic brake will be activated automatically, and the scooter will stop.

WARNING

When on a gradient NEVER switch the vehicle to the freewheel mode. The electromagnetic brakes will not be applied. This may result in injury.

SEAT

The seat can be turned to 45 degrees or 90 degrees.

Push the seat adjustment lever forward and swivel seat.

Release the lever, then continue swiveling the seat until it locks in position.

ATTENTION

Return the seat to the forward position before driving.

HOW TO ADJUST THE ARMREST WIDTH

Loosen the knobs that secureat the back of the seat frame first, then adjust the armrest width by sliding the armrest. Once satisfied with the width, tighten the knob.

HOW TO RE-POSITION THE SEAT

The distance between seat and tiller can be adjusted by repositioning the seat forward or backward. Loosen the four bolts that secure the seat to the seat platform, reposition the seat, then securely retighten the knobs.

HOW TO SET TO FREEWHEEL MODE

Engaged mode : Lift the lever up completely, the scooter can be driven by motor power.

Freewheel Mode: Push the lever down completely, the scooter can be moved manually.

TILLER ADJUSTMENT

The Tiller can be adjusted in three positions by following steps.

1.Loosen the knob until adjustment spring can be used. You should now have one to two centimeters of retractable play.

2.Place spring mechanism into your desired position. Ensure the pin locates with a click into place.

3.Once satisfied, ensure hand wheel is fully tightened to maximize safety.

13

Page 13
Image 13
Drive Medical Design Mobility Scooter Braking, HOW to Adjust the Armrest Width, HOW to RE-POSITION the Seat