INSPECTION AND MAINTENANCE

ATTENTION

1.When tread depth is below 0.5 cm it can easily lead to vehicle slippage, making braking distances longer. Therefore replace the tires as early as possible when they are found to have insufficient tread depth.

ATTENTION

When conducting maintenance of your vehicle, please turn the power switch to OFF and remove the charger cords.

SUGGESTIONS

Do not splash water directly to wash your scooter as this could lead to malfunction of the system electrics.

Do not use gasoline, solvents or vaporizing solution as these may deform or damage the shrouds.

Do not use wax.

STORAGE

Make sure the scooter is stored under the following condition:

Ensure the seat is set in the “forward” position.

Ensure the scooter is switched off.

SUGGESTION

Please store the scooter in a location where it is out of direct sunlight, rain, or dew. When storing for a long time, please charge the battery to full power and then disconnect the battery terminal. For details inquire to your dealer.

TRANSPORTING

Switch off the power with the key before moving. Always dismount from the scooter before moving.

Lift the scooter by the chassis, and not by the bumpers. Lifting the scooters by the bumper could cause damage or injury.

For your safety, ask for help if required. You will need two people when moving or lifting the scooter whole.

23

Page 23
Image 23
Drive Medical Design Mobility Scooter owner manual Storage, Transporting