GENERAL OPERATION
1.Hold the two armrests with your hands.
2.Extend the armrests outwards.
3.Push down on the seat rails to ensure the seat opens fully and locks into the receivers on the wheelchair side frames.
4.Swing the footrests around to the front of the chair and ensures that they lock into place.
5.Optional frame rigidity bar can then be put in place on the back of the seat posts.
TO FOLD THE WHEELCHAIR FOR STORAGE OR
TRANSPORTATION
1.Fold up the footplates and unlock the levers, which position the footrests. Swing the footplates and leg rests away. Either leave the foot plates in this position (Fig. 8) or remove them completely by lifting each leg rest vertically to clear the front hangers.
2.Remove the Batteries from the Battery tray.
3.Take hold of the middle seat upholstery, one hand at the front and the other at the rear, pull the seat upholstery up.
Fig. 8 | Fig. 9 |
5
