Drive Medical Design Power Wheelchair owner manual Armrest

ARMREST

The height adjustable T-type armrest (Fig. 11) is provided as standard equipment on your wheelchairs. Adjustment for the wheelchair is facilitated by a lock pin inserted from the outside of the armrest support at the lower extremity and the top of the armrest post. To activate the ball lock pin simply depress the lever found beside the support tube and remove it from the locating hole.

The controller unit can easily be adjusted to different positions in order to meet user's demand. To adjust it, (Fig. 12) loosen the knob and move the mounting tube to the desired position then tighten the screws.The armrests can be unlocked and pivoted to the rear of the chair frame to assist in patient transfers.

Button

Fig. 11

Adjusting Knob

Fig. 12

The width of the arms can be narrowed or widened by loosening the hand screw and the base of the arm.

7