Basic Setup

AUDIO SETUP

Digital output setting

Use the SETUP menu, select AUDIO SETUP to access the following screen:

--- AUDIO SETUP ---

AUDIO OUT ANALOG

COMPRESSION SPDIF/RAW

SPDIF/PCM

MAIN PAGE

AUDIO RELATED

Set the audio output format to ANALOG, SPDIF/PCM or SPDIF/RAW.

ANALOG: Analog will have no signal out from digital out jacks.

SPDIF/RAW: Will generate raw signal only from digital out jacks.

SPDIF/PCM: Will have sampling of 44.1kHz to 48 kHz and also generate signal out from digital out jacks.

The default setting is SPDIF/RAW.

Notes

When playing DVD audio, please select ANALOG to get the highest performance of audio output from the analog 5.1CH jacks.

When playing DVD video, please select the SPDIF/ RAW in order to have DTS/Dolby output from the digital out jacks.

SPDIF/RAW will also provide output from analog 5.1CH jacks for the DVD Audio, with 20 bit sam- pling cycle compare to 24 bit sampling cycle at ANALOG Mode.

AUDIO SETUP

Selecting the dynamic range

In many listening situations, it is objectionable to allow the sound to become very loud, and thus the loudest sounds must be compressed downwards in level. Like- wise, the very quiet sounds would be inaudible and must be brought upwards in level to be heard. Dolby Digital satisfies these needs with dynamic range compres- sion.

To select one of the following settings, use the SETUP menu, selectAUDIO SETUP to access the COMPRESSION menu:

OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL.

The default setting is OFF.

Note

The higher the setting selected will result in audio with a more fully compressed dynamic range.

PREFERENCES SETUP

You can access PREFERENCES only in stop mode.

Selecting the audio language

Select a desired audio language for a DVD disc that has audio data recorded in multiple-languages. To adjust this setting, use the SETUP menu, select PREFERENCES to access the following screen:

--- PREFERENCES PAGE ---

AUDIO

 

ENGLISH

DISC MENU

 

FRENCH

PARENTALGERMAN

PASSWORD ITALIAN

DEFAULTSSPANISH

DVD MODE

MAIN PAGE

PREFERRED AUDIO LANGUAGE

In the stop mode, press / to select the preferred language for audio.

The default setting is ENGLISH.

Notes

If you have selected a language that is not recorderd on the DVD disc, one of the recorded languages will automatically be selected.

To select a recorded language while the DVD disc is playing, press LANGUAGE .

13