Basic Setup
General setup
Initial settings
This system is designed with a
Using the SETUP menu
Press SETUP on your remote control unit to display the setup menu. Use the / / / buttons to select your preferred option, and press ENTER to confirm a highlighted selection. To exit setup menu, press
SETUP.
Note
•For DVD Audio, you need to press STOP first then SETUP to enter the setup menu after finished the setting, press PLAY to resume.
TV display: setting the aspect ratio The aspect ratio of a television is the relationship between it width and height that defines the shape of the picture. Television sets traditionally have an aspect ratio of 4:3. Since most DVD discs are recorded in
“wide aspect ratio ” formats, the picture must be adjusted to fit on your screen.
TV DISPLAY | 4:3 PS |
VIDEO OUTPUT | 4:3 LB |
TV TYPE | 16:9 |
OSD LANG |
|
MAIN PAGE |
|
SET TV DISPLAY MODE
4:3 PS: The Pan and Scan presentation crops both sides of the wide screen format to fill a standard 4:3 television screen.
4:3 LB: The Letterbox presentation places black bars at the top and bottom portions of the screen to provide the full wide screen format of a movie on a standard 4:3 television screen.
General setup
16:9: When connecting to a wide screen 16:9 televi- sion, select this option. The unit automatically sets and outputs a recorded signal in correct aspect ratio. Be sure to set the screen mode on your
The default setting is 4:3 PS.
4:3 PS (Pan Scan)
4:3 LB (Letter Box)
16:9
(Wide screen)
Notes
•Some DVD discs do not permit Pan and Scan mode playback and will automatically playback in Letterbox mode, and vice versa.
•If the 16:9 wide screen option is selected with a standard 4:3 television, the playback picture will appear distorted (objects will look thin).
Setting the video output
Selects the video output terminals.
YUV: Select YUV , if you have connected the video output to your television using the Component Video Out (Pr/Cr Pb/Cb Y) jacks.
The default setting is
11