Connections

Connecting to TV and Additional Components

TO RECEIVER 5.1 CH INPUT

Pr/Cr

 

Pb/Cb

 

Y

S-VIDEO IN

VIDEO IN

R O

RO

FR

FL

 

 

 

S-VIDEO

VIDEO

P r/C r

Pb/ Cb

Y

SUBW.

C

L

 

 

 

 

 

DOLBY/DTS

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL OUT

 

 

 

 

 

 

 

VIDEO OUT

 

COMPONENT

 

SR

SL

R

 

VIDEO OUT

 

 

 

 

 

DVD AUDIO OUT ONLY

AUDIO OUT OPTICAL

COAXIAL

 

 

 

 

AUDIO IN

O

COAXIAL RO

I

 

P

 

 

T

 

 

I

 

 

C

 

 

A

 

 

L

 

 

N

IN

 

 

You must connect a TV to the DVD system in order to use the DVD player. You can connect other audio and audio / visual components to the DVD system in order to use the Home Cinema Audio system’s surround sound capabilities.

Important!

-There are various ways to connect the system to a TV (as shown in the illustration). You only need to make one of these connections.

-Always refer to the instruction manual of the connected equipment to make an optical con- nection.

Connecting to TV

1Use the supplied audio cables to connect AUDIO OUT jacks to the corresponding AUDIO IN jacks on the TV or other audio/visual components.

2Use Pr/Cr Pb/Cb Y cables (not supplied) to con- nect Pr/Cr Pb/Cb Y jacks to the corresponding video input jacks on a TV.

If your TV is not equipped with Pr/Cr Pb/Cb Y video input jacks, you can select one of the following al- ternative connections:

Option 1

Connect the S-VIDEO OUT jack to the S-Video input jack on the TV using a S-Video cable (not sup- plied).

Option 2

Connect the VIDEO OUT jack to the video input jack on the TV using a video cable (supplied).

Option 3

If your TV does not have inputs for Pr/Cr Pb/Cb Y, S-VIDEO, or yellow Video jack, use an RF modulator (not supplied) to connect to your TV.

Connecting to Audio Component

Use OPTICAL or COAXIAL jacks

-To enjoy 5.1 channel surround sound, connect to an amplifier with DTS or Dolby Digital decoder, or, CD audio recorder. DVD system’ s digital audio out- put should be set to “ SPDIF/RAW ” (default).

Use DVD AUDIO OUTPUT jacks

-To enjoy 5.1 channel DVD Audio sound, you will need to connect DVD AUDIO OUT to your analog 5.1 channel inputs on your receiver. To do this, you will need 3 sets of L/R audio cables (not supplied)

Note

•In addition to 3 L/R audio cables for DVD audio, you will need either the digital-coaxial cable or the digi- tal-optical cable to enjoy 5.1 channel Dolby Digital or DTS sound from your DVD video discs.

Use AUDIO OUT jacks

-For connecting to amplifier, audio system or TV with analog audio inputs only.

10