Basic Setup

General setup

Setting the TV TYPE

To select the color system compatable with the connected television set, use the SETUP menu, select GENERAL SETUP to access the following settings:

MULTI SYSTEM: Select this mode when the connected television that uses a multi-system mode. The output format will adjust to the video signal of each disc.

NTSC: If the connected TV uses NTSC system, select this mode. It will change the video signal of a PAL disc to output in NTSC format (used in the USA, Canada and Japan).

PAL: If the connected TV uses a PAL system, select this mode. It will change the video signal of a NTSC disc to output in the PAL format (used in Western Europe)

The default setting is NTSC.

Selecting the on screen display (OSD) language

This setting is used to establish the language that will be displayed for all operations and on-screen messages.

To change this setting, using the SETUP menu, GENERAL setup screen, to access the OSD LANG menu. Select one of the five available languages: ENGLISH, FRENCH, GERMAN, ITALIAN or SPANISH.

SPEAKER SETUP

Downmix

Use the SETUP menu, select SPEAKER SETUP to set one of the following DOWNMIX settings:

--- SPEAKR SETUP PAGE ---

DOWNMIXLT/RT

TEST TONESTEREO

OFF

MAIN PAGE

SET DOWNMIX MODE

SPEAKER SETUP

Downmix

Select the DOWNMIX for LT/RT,STEREO, or OFF. The default setting is OFF.

LT/RT (left total / right total): A two-channel delivery format for Dolby surround four channels (audio left, center, right and surround) are matrix encoded two channels. The terms refer to a Dolby surround compatible downmix.

STEREO: All sound is reproduced and played through the front left and right speakers. This enables standard stereo reproduction.

Note

•Only with DVD door open or no disc in loader, you can access Downmix menu .

Test tone

The test tone mode is used after you have connected your speakers to check the balance level and connections of each speaker.

Without putting any disc in the loader using the SETUP menu, select SPEAKER SETUP to turn this function ON. The test signal, a two second pink sound, will be generated through the left, center, right, surround speakers, and subwoofer individually. The location of the speaker will be displayed on the television screen and the front display panel, as each speaker is being tested.

The default setting is OFF.

Note

•When using test tone, downmix should set to off.

12