®
BTV30 BLUETOOTH® SPEAKERPHONE
OPERATION
Transferring a Call
Press 
during a phone call to transfer audio between the BTV30 and a phone. Tip: Transfer audio to the phone before turning the BTV30 off.
Call Waiting
The unit allows two options for answering an incoming call while on an active call:
•To place the current call on hold and answer an incoming call, press and hold JOG to the right for two seconds. The unit will beep, and the incoming call will become active. To return to the original call, press and hold JOG to the right for two seconds.
•To end the current call and answer an incoming call, hold JOG to the
left for two seconds until the unit beeps. The incoming call will become active and the current call will be released.
Volume
To adjust the volume level, press JOG to the left to decrease volume or to the right to increase volume.
Note: the volume can only be adjusted during a call.
Mute
To mute the microphone during a call, press in on JOG once. To turn off the mute function, press in on JOG one more time.
Reset
To reset the unit to its factory settings, press and hold 
for approximately eight seconds. "RESET" will appear in the display.
Note: When the unit is reset, many user settings will be deleted, including paired device information, selected ring tone and incoming call list. No phone numbers will be deleted from the phone book when the unit is reset. Please refer to page 9 for instructions for resetting the phone book.
5
