Dual MXD45 General Operation, Faceplate Removal, Mute Display Set the Clock 12/24-hourClock

MXD45 OPERATION

Faceplate Removal

Semi-permanent Faceplate Installation

Power On/Off

CD Mode

Tuner Mode

Bass Boost

Volume

Mute

Display

Set the Clock

12/24-hour Clock

General Operation

Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.

Press PWR or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press PWR to turn the unit off.

Insert a CD or press l/ II to begin or resume playback.

Press PWR or BAND to begin or resume tuner operation.

Press BASS to activate and deactivate bass boost curve. Activating this feature will enhance the bass frequencies when listening to music at all volumes.

Adjust volume using VOL t / VOL s (00-46).

Press MUTE to silence the audio. “MUTE” will appear in the display. Press MUTE again to cancel.

Press DISP to display the clock. The radio frequency (tuner mode) or CD track/elapsed time (CD player mode) show by default.

Press DISP to display the clock, then release. Press and hold DISP for 2 seconds, the clock will begin to flash. Press TUNE

<<to adjust the hours and TUNE >> to adjust the minutes. Clock settings will be saved after 5 seconds.

The clock will display 12-hour AM/PM time in U.S. frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00).

5