Dual XD6150 owner manual Audio Bass Treble Balance Fader Preset EQ Curves Loudness

XD6150 OPERATION

General Operation

Audio

Bass

Treble

Balance

Fader

Preset EQ Curves

Loudness

Press AUDIO/MENU momentarily to select between Volume (default), Bass, Treble, Balance and Fader.

VOLUME BASSTREBLEBALANCE FADER

Press AUDIO/MENU until BAS appears. Rotate the volume knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until TRE appears. Rotate the volume knob left/right to adjust ( -6 minimum / +6 maximum).

Note: Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Note: Bass and Treble settings are retained for each mode individually.

Press AUDIO/MENU until BAL appears. Rotate the volume knob left or right to direct the sound output to the left or right (BAL L12 - BAL R12). BAL 00 represents equal balance.

Press AUDIO/MENU until FAD appears. Rotate the volume knob left or right to direct the sound output to the front or rear (FAD F12 - FAD R12). FAD 00 represents equal fader.

Press EQ•LOUD to select between POP, JAZZ, CLASSIC, BEAT, ROCK and FLAT (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Press and hold EQ•LOUD for 3 seconds to activate the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes.

8