Dual XDM6350 General Operation, Faceplate Removal, Input Interface Volume Mute Preset EQ Curves

Models: XDM6350

1 24
Download 24 pages 8.04 Kb
Page 6
Image 6
General Operation

XDM6350 OPERATION

General Operation

Faceplate Removal

Semi-Permanent Faceplate Installation

Power On/Off

Mode

Auxiliary Input

Steering Wheel

Input Interface

Volume

Mute

Preset EQ Curves

Reset

Display

Set the Clock

Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Remove trim ring and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.

Press Faceplate Removal or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press and hold Power On/Off to turn the unit off.

Press MODE to select between AM/FM, CD player, auxiliary input and USB. Modes of operation are indicated in the display.

Note: CD mode will not appear unless a CD is inserted.

Insert 3.5 mm plug to connect your portable audio device.

The steering wheel interface input located on the back of the head unit allows connection to the Pacific Audio Corporation SWI-PSinterface module (sold separately). Visit www.pac- audio.com for details.

To configure steering wheel controls, follow the instructions provided with the PAC SWI-PSinterface module. After installing the interface module, insert the module's 3.5mm jack into the port on the back of the head unit.

Adjust volume using rotary encoder (00-46).

Press MUTE to silence the audio. “MUTE” will flash in the display. Press MUTE again to cancel.

Press EQ to enter EQ setup menu, then use the rotary encoder to select between POP, JAZZ, CLASSIC, BEAT, ROCK and FLAT (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Press to RESET the unit upon initial installation or if abnormal operation occurs. The reset button is located behind the faceplate.

Press DISP to select between clock and different types of information, such as radio frequency, CD track or MP3/USB song information.

With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.

6

Page 6
Image 6
Dual General Operation, Faceplate Removal, Power On/Off Mode Auxiliary Input Steering Wheel, XDM6350 OPERATION