XDMA6415 OPERATION

Specifications

CD Player

FM Tuner

AM Tuner

General

Frequency response: 10Hz-20kHz

Channel separation @ 1kHz: >65dB

D/A converter: 1 Bit

Tuning range: 87.5MHz-107.9MHz

Usable sensitivity: 8.5dBf

50dB quieting sensitivity: 10dBf

Stereo separation @ 1kHz: 40dB

Frequency response: 30Hz-13kHz

Tuning range: 530kHz-1710kHz

Usable sensitivity: 22uV

Frequency response: 30Hz-2.2kHz

Operating voltage: 11-16 VDC, negative ground

Speaker output impedance: 4~8 ohms

Line output voltage: 2 Volts

Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)

Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications

(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)

Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N

Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)

27

Page 27
Image 27
Dual XDMA6415 owner manual Specifications, CD Player FM Tuner AM Tuner General, Tuning range 87.5MHz-107.9MHz

XDMA6415 specifications

The Dual XDMA6415 is a cutting-edge dual-channel digital signal processor designed for a wide range of applications, including telecommunications, industrial control systems, and consumer electronics. This advanced DSP architecture allows for high-performance data processing with exceptional efficiency and versatility.

One of the standout features of the Dual XDMA6415 is its high-speed processing capability. It is equipped with multiple processing cores that operate in parallel, enabling it to handle complex algorithms and large data sets with ease. This parallel processing architecture significantly enhances real-time processing capabilities, making the Dual XDMA6415 an ideal choice for applications that require rapid data handling and decision-making.

The Dual XDMA6415 also incorporates advanced digital communication technologies. It supports various protocols, including Ethernet, DSP, and serial communication, ensuring seamless integration into existing systems. The device is designed with enhanced flexibility, allowing users to configure the communication interfaces based on their specific needs. This adaptability is critical for developers looking to create custom solutions that meet unique application requirements.

In terms of power efficiency, the Dual XDMA6415 shines with low power consumption, making it suitable for battery-operated devices and energy-conscious applications. Its advanced power management features enable dynamic power scaling, ensuring optimal performance while minimizing energy usage. This characteristic is particularly beneficial for mobile and portable devices where battery life is a key consideration.

The device also boasts robust data integrity and error correction mechanisms. These features ensure reliable communication and processing, which are essential for mission-critical applications. With built-in redundancy and fault tolerance, the Dual XDMA6415 enhances system reliability and operational stability.

Another significant aspect of the Dual XDMA6415 is its scalability. The architecture supports both small-scale and large-scale implementations, allowing developers to tailor solutions based on specific project demands. This scalability, combined with the device's rich feature set, makes it a future-proof choice for a growing range of applications.

In summary, the Dual XDMA6415 represents an innovative leap in digital signal processing technology. With its high-speed processing capabilities, advanced communication support, energy-efficient design, and robust reliability features, it is poised to meet the challenges of modern digital systems across various industries, ensuring high performance and adaptability for developers and engineers alike.