Dual XDMA6415 owner manual Function, Remote control. Press to begin dialing

XDMA6415 OPERATION

Bluetooth® Operation

Function		Description
	Press once. An "_" will appear on the display.
	Input the desired phone number using the 0-9, *, # buttons on the
Making a Phone Call	remote control. Press to begin dialing.
	A phone call may be placed from your mobile device using the
	keypad, phone book or speed dial. When a call is placed from a
	mobile device, “DIALING” will appear on the head unit display.
	To enter last number dialing mode, press			, then press a second
	time. The head unit will display "LAST NUMBER DIAL."
Last Number Dialing	Press DISP to cycle through the received, dialed or missed call
	categories. Rotate the volume knob to cycle through the last 5 calls in
	the selected category.
	Press to begin dialing the selected number. “DIALING” will appear
	on the head unit display.
	If an incoming call is detected, the head unit will automatically switch
	to Bluetooth mode, muting any audio that may be playing.
	The incoming phone number will scroll across the display, the phone
	icon will flash on the display and a ring tone will be audible from the
Receiving a Phone	vehicle speakers. See Bluetooth Settings for speaker configurations.
Call	Note: The ring audio level will depend the mobile device and head
	unit ring volume and audio settings. If the ringer on the mobile device
	is off, you may not hear an incoming ring tone.
	Press on the head unit to receive a call. The phone icon will
	illuminate solid.
Refusing a Call	To refuse an incoming phone call, press and hold				for 3 seconds.
	The head unit will display the elapsed time of the phone call.
During a Phone Call	The volume knob will adjust the volume of the call.
	Press	momentarily to select between microphone on (MIC ON)
	and microphone off (MUTE).
	To transfer the phone call between the head unit and the mobile
Audio Transfer	device, press and hold DISP for 3 seconds during a call.
	Tip: transfer audio to your mobile device before turning the head unit
	off.
Call Waiting	When a second call is incoming, press			to activate call waiting. The
	current call will be placed on hold, and the second call will be active.
	Press again to return to the first call.
Call Hold	During a phone call, press		to place the current call on hold. To
	resume the phone call, press		again.
Ending a Phone Call	Hold	for 3 or more seconds to end a call.
	If the phone call was received, the head unit will return to previous
	mode when call is ended.
					23