Dual XDMA6700 owner manual General Operation, Faceplate Removal, Power On/Off Mode Volume

XDMA6700 OPERATION

Faceplate Removal

Semi-Permanent Faceplate Installation

Power On/Off

Mode

Volume

Programmable Turn-On Volume

Mute

Preset EQ Curves

General Operation

Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure.

Remove trim ring, and install supplied #1 x 7/32” Phillips head screw through left side of mounting frame into faceplate.

Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER to turn the unit off.

Press MODE to select between AM/FM, CD player, auxiliary input, iPod (optional), and Bluetooth (optional). Modes of operation are indicated in the display.

Note: CD, iPod, and Bluetooth modes will not appear unless a CD is inserted, IPC2M (iPod cable - sold separately) and iPod are attached, or BTM60 (Bluetooth module - sold separately) is attached.

Adjust volume using rotary encoder (00-46).

Press and hold POWER for 3 seconds to program currently selected volume level. "P-VOL" and the current volume level will momentarily appear in the display.

Press MUTE to silence the audio. “MUTE” will flash in the display. Press MUTE again to cancel.

Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

5