Dual XDMAR6720 owner manual Channel Search, Changing Channels Band Presets Parental Control

XDMAR6720 OPERATION

SiriusXM Vehicle Tuner Operation

Changing Channels

Band

Presets

Parental Control

Channel Search

Begin Your Search

Channel List

Category Search

Direct Channel Input

Pressdown. TUNE nn or TUNE llto select the next channel up or

Hold down TUNE nn or TUNE ll to quickly change channels. Release the button to stop on the desired channel.

Press BAND to select between the SXM1, SXM2 and SXM3 bands. Up to six presets can be programmed for each band.

Up to 18 SiriusXM Satellite Radio channels can be stored in memory. To store a channel, select the desired band and channel. Press and hold the desired preset button (1-6) on the front panel or remote control for more than two seconds. When stored, the preset number will appear in the display. The channel can be recalled by pressing the corresponding preset button.

Note: Buttons 7,8,9,0 on the remote control are not associated with channel presets.

See the SiriusXM setup menu on page 10 for parental control instructions.

Press SELECT to start searching for a specific channel. Choose between Channel List, Category Search or Direct Channel Input.

Displays a list of all available channels.

•Highlight "Channel List" and press SELECT.

•Turn the volume knob to cycle through the list of channels.

•Press DISP to change between the channel name and the currently playing artist or song title.

•Press SELECT to begin listening to the highlighted channel. Searches for channels in a certain category.

•Highlight "Category Search" and press SELECT.

•Turn the volume knob to cycle through the list of categories.

•Press SELECT to choose a category and display the channels in that category.

•Press DISP to change between the channel name and the currently playing artist or song title.

•Press SELECT to begin listening to the highlighted channel. Input a channel number to directly tune to that channel.

•Highlight "Direct Channel Input" and press SELECT.

•Use one of the two methods below to enter the channel number:

1)Enter the 1, 2 or 3-digit channel number using the remote control 0-9 keys and press SELECT. Press ESC to delete a digit.

2)Use the unit volume knob to select 0-9 for the number digits. If applicable, use TUNE llto advance to the next digit and press SELECT to tune to the entered channel. Press ESC or TUNE nnto delete a digit.

Example: To tune to channel 12, select "1" using the volume knob, press TUNE llto advance, then select "2" with the volume knob and press SELECT.

14