Dual XDMR7710 owner manual XM Radio Activation, XM Radio Operation, Tuning Modes

XDMR7710 OPERATION

XM Radio Activation

Activating Your XM Receiver (when connected)

1.Press MODE to select XM Radio.

2.Verify channel 1 (XM Preview Channel) is playing.

3.Select Channel 0. The XM receiver’s eight character Radio ID number will appear on the XDMR7710 display.

The Radio ID number is also located on the XM receiver unit (sold separately).

4.Record the number here for future reference:

5.Activate your XM Satellite Radio service.

To subscribe, log onto http://www.xmradio.com/activation or call 1-800-967-2346.

Note:

You will need to keep your XDMR7710 turned on for at least one hour after requesting activation to receive the full channel line-up.

XM Radio Operation

Tuning Modes

Basic Channel Selection

Direct Channel Selection

Category Recall

Press BAND to select between XM DIRECT, XM1 and XM2 bands.

Press TUNE nn or TUNE ll momentarily to select the next available channel. Press and hold to advance quickly.

Press BAND to select XM DIRECT channel entry band. “DIRECT” will momentarily appear in the display. Enter the desired channel using buttons 1-0, then press FUNC for 3 seconds to confirm the selected channel. If the channel is not available, the current channel will be retained.

Press FUNC once to display the category of the currently selected channel for 10 seconds. The CATEGORY icon will appear on the display.

10