Dual XHD7720 owner manual Bluetooth Operation

XHD7720 OPERATION

Bluetooth® Operation

Function		Description
	Press once. "Enter Number" will be shown, then An "_" will
	appear on the display.
	Input the desired phone number using the 0-9, *, # buttons on the
Making a Phone Call	remote control. Press to begin dialing.
	A phone call may also be placed from your mobile device using
	the keypad, phone book or speed dial. When a call is placed from
	a mobile device, “DIALING” will appear on the head unit display.
	If an incoming call is detected, the head unit will automatically
	switch to Bluetooth mode, muting any current audio.
	The incoming phone number will scroll across the display, the
	phone icon will flash on the display, and a ring tone will be
Receiving a Phone	audible from the vehicle speakers. See Bluetooth Settings for
	speaker configurations.
Call
	NOTE: The ring audio level will depend the mobile device and
	head unit ring volume and audio settings. If the ringer on the
	mobile device is off, you may not hear an incoming ring tone.
	Press on the head unit to receive a call. The phone icon in the
	display will illuminate solid.
	The head unit will display the elapsed time of the phone call.
During a Phone Call	The volume knob will adjust the volume of the call.
	Press MUTE to mute the built-in microphone during a call.
Refusing a Call	To refuse an incoming phone call, press and hold		for 3
	seconds.
Ending a Phone Call	Hold	for 3 or more seconds to end a call.
	If the phone call was received, the head unit will return to
	previous mode when call is ended.

26