Dual XML8100 owner manual Bluetooth Operation, Refusing a Call

	XML8100 OPERATION
	Bluetooth® Operation
Function	Description
	Press once. "Enter Number" will be shown, then An "_" will
	appear on the display.
	Input the desired phone number using the 0-9, *, # buttons on the
Making a Phone Call	remote control. Press to begin dialing.
	A phone call may also be placed from your mobile device using
	the keypad, phone book or speed dial. When a call is placed from
	a mobile device, “DIALING” will appear on the head unit display.
	If an incoming call is detected, the head unit will automatically
	switch to Bluetooth mode, muting any current audio.
	The incoming phone number will scroll across the display, the
	phone icon will flash on the display, and a ring tone will be
Receiving a Phone	audible from the vehicle speakers. See Bluetooth Settings for
	speaker configurations.
Call
	Note: The ring audio level will depend the mobile device and head
	unit ring volume and audio settings. If the ringer on the mobile
	device is off, you may not hear an incoming ring tone.
	Press to receive a call. The phone icon in the display will
	illuminate.
	The head unit will display the elapsed time of the phone call.
During a Phone Call	The volume knob will adjust the volume of the call.

Pressto mute the BTM60's microphone during a call.

Refusing a Call	To refuse an incoming phone call, press and hold	for 3
	seconds.

Holdfor 3 or more seconds to end a call.

Ending a Phone Call If the phone call was received, the head unit will return to

previous mode when call is ended.

15