Dual XML8100 owner manual Bass Treble Balance Fader EQ SUBWOOFER* Source Level

Models: XML8100

1 24
Download 24 pages 34.51 Kb
Page 9
Image 9

XML8100 OPERATION

Audio

Bass

Treble

Balance

Fader

EQ

Source Volume Level

Subwoofer

General Operation

Press AUDIO/MENU momentarily to select between Bass, Treble, Balance, Fader, EQ, Subwoofer* and Source Volume Level.

BASS TREBLE BALANCE FADER EQ SUBWOOFER* SOURCE LEVEL

Press AUDIO/MENU until Bass appears, then rotate the volume knob left/right to adjust (-6 minimum / +6 maximum).

Press AUDIO/MENU until Treble appears, then rotate the volume knob left/right to adjust ( -6 minimum / +6 maximum).

Note: Any adjustment to the Bass or Treble settings are automatically saved as the User EQ.

Bass and Treble settings are retained for each mode individually.

Press AUDIO/MENU until Balance appears, then rotate the volume knob left/right to adjust L12 (left) to R12 (right). Balance L=R represents equal balance.

Press AUDIO/MENU until Fader appears, then rotate the volume knob left/right to adjust (F12 (front) to R12 (rear). Fader F=R represents equal fader.

Press AUDIO/MENU until EQ appears, then rotate the volume knob left/right to select between Flat, Pop, Rock, Jazz, Classic, Beat or User equalization curves. Any adjustment to the Bass or Treble settings are automatically saved as the User preset EQ.

The source volume level control allows a gain adjustment for each audio source: AM, FM, Auxiliary input, operation of iPod and Bluetooth. Set the source volume level for each mode, depending on the relative volume of each audio source.

To set the source volume level, press AUDIO/MENU until SRC LEVEL appears. After one second, the current mode will appear on the display. Turn the volume knob to adjust the audio level of the current source (-6 minimum/+6 maximum).

Note: Only the current mode will be available for adjustment. To adjust another mode of operation, press MODE until the desired mode is selected, then set the source volume level for that mode.

Press AUDIO/MENU until Sub-Wappears, then press SELECT to confirm. Rotate volume knob left/right to adjust (0-12). Adjusting levels to 0 turns the subwoofer off.

9

Page 9
Image 9
Dual XML8100 owner manual Bass Treble Balance Fader EQ SUBWOOFER* Source Level