Dualit DBL3 manual Save These Instructions, Safeguards, Knowing Your Blender, Before Plugging In

Models: DBL3

1 12
Download 12 pages 55.62 Kb
Page 5
Image 5
SAFEGUARDS

SAFEGUARDS

KNOWING YOUR BLENDER

Never remove the jug from the power base until motor and blades are stationary. Damage to the clutch can occur

Do not leave the blades in water and never leave the blender jug with any liquid inside it

Keep jug empty when not in use

Do not add boiling liquids or foods to glass jug. Always cool liquids or food items to below 60°c before adding

Frozen foods with the exception of small pieces of fruit or ice cubes should not be placed in the jug

Do not insert frozen items into jug taken directly from a hot dishwasher

Do not immerse or wash jug in boiling or very hot water

SAVE THESE INSTRUCTIONS

BEFORE PLUGGING IN

Use this product with rated voltage A.C. outlet only

Be sure to unplug the A.C. cord when blender is not being used

Do not plug the appliance in before checking that the voltage indicated on the rating plate is the same as the electrical supply voltage

If the power cord is damaged it must, for safety reasons, be replaced by Dualit or an authorised Dualit repairer

If blender fails to operate refit lid ensuring correct positioning of the plunger into the Safety Interlock System and/or unplug for 15 minutes, plug in and try again

Ensure the blade assembly is cor rectly fitted

If problems persist, either contact the shop where you purchased from, or contact Dualit customer services.

SAFETY INTERLOCK SYSTEM

This appliance is provided with a safety system which disables the mechanism if the jug lid or blade assembly is not fitted even if the switch button is ON.

Note: Do not use the jug to switch the appliance on and off.

Only use with the glass jar and lid firmly in place, ensure the lid and plunger are correctly positioned into the Safety Interlock System, page 7. A small micro switch detects if the blade assembly is locked into the collar and is located in the correct position. If the jug and blade unit are not correctly assembled the motor will not start.

ALWAYS PLACE ONE HAND ON TOP OF THE LID WHEN THE MOTOR IS RUNNING. ENSURE SAFETY INTERLOCK IS FIRMLY ENGAGED

5

Page 5
Image 5
Dualit DBL3 manual Save These Instructions, Safeguards, Knowing Your Blender, Before Plugging In, Safety Interlock System