ASSEMBLING YOUR BLENDER
USING YOUR BLENDER
BLENDING
•Do not plug in until you have assembled your blender and unplug straight after use
•Prior to first use, wash lid, jug and blade unit
•Place the jug onto the power base
•Push the lid onto the jug and at the rear of the lid locate the plunger into the Safety Interlock
•The Dualit blender has a double Safety Interlock that prevents the motor running unless the lid and blade is correctly in position
FILLER CAP / BLADE KEY
•Remove cap and add ingredients only at slow speeds. When using at high speed, with a full jug or with warm contents, stop blender and then add ingredients
•The filler cap doubles up as a key for removing the blade assembly from the Jug for cleaning
•Plug power cord into earthed socket. Blender is now ready for use. Please Note: The Red power light indicates that there is power to the Blender. This light changes to a Green light
when the blades are running
•Place fully assembled jug onto power base
•Insert foodstuffs into the jug
•Attach lid, ensuring the safety plunger is in place. Keep hand on rear of lid to ensure safety switch is engaged
•Switch unit on, the power light will slowly flash red
•Turn speed control knob to desired setting
•Press the start/stop button, the red flashing light, will turn to solid green and the blades will rotate
•To turn off, press the start/stop button again, the power light will return to flashing red
•To pour, using the handle, lift the jug vertically upwards off the blender base, remove the lid to pour
•The speed can be adjusted when blending by turning the speed knob in either direction
•All speeds can be used with pulse button. On the speed control knob 1 is slow 5 is fast
•When blending warmed foods, do not add ‘hot’ liquids to glass jug.
Always allow liquid to cool below 60°c before adding to the jug and place a gloved hand over the lid and only operate on slow speed
•Do not insert frozen foods into jug taken directly from a hot dish washer
8
