Dualit DCT 2 instruction manual Operation, Toasting Bread, Toasting Other Products

OPERATION TOASTING BREAD TOASTING OTHER PRODUCTS

Dualit conveyor toasters are equipped with a rotary power saver switch. Turn clockwise or counterclockwise to obtain the following positions:

FULL POWER	When in this position
	your equipment is at
	full power and ready to
	use.
OFF ROTARY	Two off positions are
	provided so that a
	single rotation to either
	direction will shut the
	unit off.
STANDBY	The standby position
	reduces the power
	consumption by 75%.
	Using this position
	during quiet times
	will save electricity and
	keep the toaster warm.
	Use this whenever you
	know the toaster is not
	required for the next 10
	minutes. When needed,
	turn the switch to FULL
	POWER. Recovery time
	is about 30 seconds.

The Dualit conveyor toaster is a versatile machine which can be used for toasting or warming a variety of bread products.

Follow the instructions to achieve best toasting results:

1.Turn the power saver to FULL POWER.

2.Set the conveyor speed to 5.

3.The toaster is equipped with separate top and bottom heat controls. For toast we recommend setting them both to 10 (HIGH).

4.Allow a warm-up time of 5 to 10 minutes to allow the toaster to reach optimum operating temperature.

5.Place a sample product on the conveyor belt to test the settings.

6.For best results set both heat regulators to full and set the speed to (5).

7.Vary the speed of the belt to achieve lighter or darker toasting.

Any change to the speed setting will take a few seconds to take effect.

You can use the conveyor toaster to warm or toast other bread type products such as buns, muffins, bagels and crossiants.

1.Adjust the top and bottom element temperatures to required settings. Ensure any food product used with the conveyor is less than 30mm thick. If larger it may get stuck inside the toaster.

2.For buns and bagels and other items requiring only one side toasting , set the top element to 10 (High) and the bottom to 5 (Medium). Don’t forget, any change to the heat setting will take a few minutes to take effect.

3.Adjust the speed as in previous section to vary the browning.

4.Products flip over when coming off the conveyor belt

NOTE: Products will toast at different speeds. Adjustments of the heat controls maybe required to achieve desired results.

CAUTION: Burgers/meat products must not be cooked/heated in his machine

3