050107_Quark file for Blender.qxp 1/10/2007 10:59 Page 7
Fig. 5 Locating the blade key | Fig. 6 Unlocking blade assembly |
Unlocking the blade assembly for cleaning:
•The filler cap doubles as a key 1 to unlock the blade from jug.
•To unlock the blade, remove the filler cap / key from the lid. Turn the jug 4 upside down and rest on a steady surface.
•Position the key 1 in the collar 3 aligning the indicators on the collar 13 as shown in Fig 5.
•Holding the jug steady, rotate the key clockwise Fig 6. to the unlock position indicated on the collar 13 Fig 7. Then pull vertically to remove the blade assembly.
CAUTION: THE BLADES ARE VERY SHARP!
Fig. 7 Removing blade from jug
1
11
12
13
•To replace and lock the blade assembly, reverse the unlocking instructions.
IMPORTANT: ENSURE THE BLADE ASSEMBLY 11 AND RUBBER GASKET 12 IS CORRECTLY
LOCKED INTO THE JAR TO CREATE A WATER TIGHT SEAL BEFORE USING.
7